Florida Gator Flower Arrangments

bandana soaked with flower and leaf with flower middle minibolsita

bandana soaked cotton thread woven into a single color, with a flower leaf 2 coats.

for girls size 4 and up and youth.

Preparation H Saran Wrap Waist Reduction

minibolsita woven 100% cotton yarn with the best of two middle layers and button trim (fabric is lined inside and magnet clasp)

Does Wearing Underwear Make

fllor woven fabric sheet and button timing

flower woven in three layers and 6 petals

100% cotton fabric covered buttons and fabric sheet

French snap from behind or clip for use as a corsage

When Your In The Shower I Pikachu

half hat with flower flower

half hat pierced with flower petals and eight 3-layer fabric 100% cotton thread

Labeled Diagram Of 45 Boat

Alexia

This tutorial has been made with Corel PSP X
but can be done with any other version

* The tube "gothic_dark: 017" belongs to Pattyf56
My thanks

Filters:
Adjuts / Variations
Graphics Plus / Xero
Border Fade XL / Porcelain
Unlimited 2.0


Material


For any problems that may arise, remember
save your work often

started

:

1 .- Open a new transparent cloth 500 x 584
In palette color to foreground color: # 895935
and Background color: # d0b298
Form a gradient with two colors
Linear. Angulo 45. Repetitions: 3
With paint bucket, paint the cloth

2 .- Effect of Contours. Further enhanced. Twice
3 .- Layers. New raster layer

4. Open "pincelalexia"
File. Export. As
Save custom brush with the name of pincelalexia

5 .- paintbrush tool. Values:



Apply "pincelalexia" in the new layer

open before 6 .- Fit. Free rotation: Left. 90 º
7 .- Layers. Duplicate
8 .- Image. Locate
turn to model

9 .- Open "gothic_dark_017"
Copy and paste as new layer Place to model


10 .- Effects. Adjuts filter. Variations
Select: Midtones
A click on "original" click More
A network. Ok

11.-Set. Sharpness. Focus
12 .- Layers. Merge. Flatten

13 .- Effects. Graphics Plus / Border Fade
Values: 37/0/0/0/0

14 .- Effects. Xero XL / Porcelain
Values: 50/50/100/0/0/0/0/0

15 .- Effects. Unlimited 2.0/Convultion
Emboss Filter (ligh, inverse)
Stock: 125 16 .- Image

. Adding Borders: 50 px White: # ffffff
17 .- With Wand tool. Values:



Edge Select

50 px 18 .- Form a gradient: linear / Angle 45/Repeticiones: 3
Foreground: # a5876a
Fund # b57e57
With Tool Boat Paint: paint the edge of 50 px

19 .- Without removing selection:
3D effects. Inner Bevel. Values:



20 .- Selections. Investing
21 .- 3D effects. Shade: 5/5/50/5/negro
22 .- Selections. Remove Selection

23 .- Effects. Unlimited 2.0/Edges, Square / Square Edge 17

24 .- New Raster Layer
25 .- Put the copy
26 .- Layers. Merge Visible
27 .- Save as PNG

And presto!

I hope you enjoyed it Thanks for making

Besitos



If you see any mistakes in the explanations of
this tutorial, I will thank you for
tells me correct it immediately. Thanks
rosasblog@gmail.com

Tutorial by © Artemis-August-2010

Authorship Respecting Prohibited Reproduction or copying of this
Tutorial without asking my permission
Thanks

Lorna Morganstreaming

Stand

This tutorial has been made with Corel PSP X
but can be done with any other version

* The tubes I used in this tutorial
know who owns

My thanks

Filters: Xero
Unlimited 2.0
XL / Porcelain Material





For any problems that may arise
remember to save your work often



started:

1 .- Open a new transparent cloth 680 x 480

2 .- color palette to foreground color: # 803B24
and Background color: # 610C02
Join a gradient with two colors
Linear. Angulo 45. Repetition 1. Investing No

3 .- Paint Bucket: painting the cloth
4 .- Distortion Effects. Pixelate
Values: 50/50
Cotornos 5 .- Effects. Further enhance
(2 times)
Set. Sharpness. Focus

6 .- Open "facade"
Copy and paste as new layer
Blend Mode: Hard Light Opacity
: 60

7 .- Open "BM_legacy_Universal"
Copy and paste as new layer Place to model


8 .- Effects. Unlimited 2.0/Special Filter Effects 1 /
Lightness/129
Blur Set. Sharpness. Focus

9 .- 3D effects. Shade: 1/1/100/1/negro (twice)
3D effects. Shade: 5/5/50/5/negro
Layers. Merge. Flatten

10 .- Effects. Xero XL. Porcelain
Values: 50/50/0/0/100/0/0/0

11 .- Image. Add Border: 1 px
color # ffffff (White)

Adding Borders:
50 px color: # 2B0506

12 .- Wand tool. Values:

Select

50 px edge
Selections. Investing

13 .- 3D effects. Shade: 5/5/50/5/negro
Repeat the first two negative values \u200b\u200b(-5) (-5) Remove Selection


14 .- Image. Resize: 89%
Set. Sharpness. Focus
Note: this step to work smaller, I always work
to upload to blogs or forums that do not support images larger than 700 px


15 .- Save as JPG

And presto!

I hope you enjoyed it Thanks for making

Besitos



If you see any mistakes in the explanations of
this tutorial, I will thank you for
tells me correct it immediately. Thanks
rosasblog@gmail.com

Tutorial by © Artemis-August-2010
Respect Authoring
Reproduction or copying of this
Tutorial without asking my permission
Thanks

Pinapple Juice And Jiz

This tutorial has been made with Corel PSP X
but can be done with any other version

* The tubes "purple_beauties" and "When_Bright_Flower_Bloom"
belong to La Manouche
* The tube jet-woman 10 "belongs to Jet Psp

* My thanks

Filters:
* not used


Material


For any problems that may arise, remember
save your work often



started:

Open a new transparent cloth 650 x 450 px
Color Palette:
Foreground: # 9d6a3d
Fund # e2c7ac
Join a gradient with two colors: Linear
. Angle: 45 / Reps: 3 / Investing
With pot tool paint fill the new cloth
Texture Effects. Leather Tanning.

values \u200b\u200b

Open "purple_beauties" (Fresh)
Copy and paste as new layer
Blend Mode: Adjust Brightness
Legacy. Sharpness. Locate
focus to model 3D effects
. Shade: 5/5/50/5/negro

Open "When_Bigth_Flowers_Bloom" (vase of flowers)
Copy and paste as new layer Image
. Resize: 70%
Blend Mode: Adjust Brightness
Legacy. Sharpness.
focus more 3D Effects. Shade: 5/5/50/5/negro
Locate by model Layers
left side.
Duplicate Image. Locate
mirror to model the right side so
that looks like a single vase
Open
jet-woman 10 "(Girl)

Copy and paste as new layer Image
. Resize: 80%
Set. Sharpness. Focus
3D Effects. Shade: 5/5/50/5/negro
Layers. Merge. Book this image flattening


reserved Duplicate the image to continue working on it

Image. Add Borders
1 px color # 542c08
Image. Add Borders
20 px color # ffffff (White)

With Wand tool. Values:
Add Shift. Value
RGB Tolerance: 0
Cast: 0
Smooth. Exterior
select the edge of 20 px

Copy and paste the image in the selection Set
reserved. Blur. Gaussian Blur: 30
selections. Image removed

selection. Add Borders
1 px color # 542c08
Image. Add Borders
20 px color # ffffff (White)
With Wand tool and with the same values \u200b\u200b
earlier, copy and paste the image again
reserved
Adjust selection. Blur. Gaussian Blur: 10

Effects. Texture.
leather with the same values \u200b\u200bas before
Set. Sharpness. Selections
focus. Investing
Effects 3D. Shade: 5/5/50/5/negro
Selections.
Deselect
Image. Add Borders
1 px color # 542c08

In a new raster layer to the Layers
copy. Merge. Flatten

Since we have been a little bigger picture
the leave to the extent that is good for up to

forums Open a new transparent cloth of 700 x 510
selections. Select All our work
Copy and paste the selection
selections. Remove selection
Set. Sharpness. Focus

Save as JPG

And ready!

I hope you enjoyed it Thanks for making



Besitos

If you see any mistakes in the explanations of
this tutorial, I will thank you for
tells me correct it immediately. Thanks
rosasblog@gmail.com

Tutorial by © Artemis-03-7-2010
Respect Authoring
Reproduction or copying of this
Tutorial without asking my permission
Thanks

Gay Cruise Spots In Nyc

Elegant Woman



This tutorial has been made with Corel PSP X
but can be done with any other version

* The tube "Fribourg" anna.br belongs to (know your website if applicable)
also know the authors of the other two tubes I used in this tutorial
My thanks

Filters:
Adjuts / Variations



Material

For any problems that may arise, remember
save your work often



started:

1.-Open a new transparent cloth of 654 x 407
In color palette to foreground color: # 8163e9
and Background color: # b7a1e9
Form a gradient with two colors Linear
. Angle: 45. Repetitions: 3
With paint bucket, paint the cloth

2.-Open "anna.br_fribougr"
copy layer "Mister" and paste as new image outside our work

3 .- Image.
Grayscale Layers. New raster layer
With paint bucket tool, paint with white # ffffff
Layers. Organize.
lower layers. Merge. Flatten
Save this image as a jpg with the name "mask"
Close this image and open it again to leave you with the name "mask"


4 .- Close the initial work
Back Layers. New raster layer
With Tool Boat Paint, paint with white # ffffff
Layers. Organize. Download
On Frame 1

5 .- Layer. New mask layer. From an image
Select "mask." Source luminosity

not invest Layers.
Group Merge Layers. Merge. Flatten

6 .- Effects. Filter FM Tile Tools / Blend Emboss
Values: (-1,000) / (-1,000) / 0,250 / 64 / 0,938 / 0,938 / 0,938
Edge Wrap: Apply twice
tikeado

7 .- Add Borders. 1 px white # ffffff
Adding Borders: 60 px color # 621da5

8 .- Wand tool. Values:

Select

edge 60 px
Selections. Investing

8 .- 3D effects. Shade: 5/5/50/5/negro

Deselect
9 .- Open "Trizio Tube_The_Road_Home"
Copy and paste as new layer Image
.
Mirror Image. Resize: 80%
option "Resize all layers" There should be tikeada

10 .- Effects. Filter Adjuts / Variation
A click on "original"
A click on "More Magenta" Ok
Set. Sharpness. Focus
3D Effects. Shade: 5/5/50/5/negro

11 .- Open "24"
Copy and paste as new layer Image
. Change size: 80%
option "Resize all layers" There should be tikeada
Set. Sharpness. Focus

12 .- New Raster Layer Place the copy

Layers. Merge. Flatten

Save as JPG

And presto!

I hope you enjoyed it Thanks for making

Besitos



If you see any mistakes in the explanations of
this tutorial, I will thank you for
tells me correct it immediately. Thanks
rosasblog@gmail.com

Tutorial by © Artemis-August-2010 Authorship Respecting

Reproduction or copying of this
without asking my permission Tutorial
Thanks

Pizza Flavored Chips Buy Online

Spiral Illusion Gallery

This tutorial has been made with Corel PSP X but can
do with any other version

* The tubes I used for this tutorial:
* Tube calguisdoceur17710 "ism
* Tube-proppies lizztish_picking" Lizzy Tish
* Tube "Homen cute" Cehilda sandwiches. Know your group or web


My thanks

Filters:
Simple / Quick Tile
DSB Flux / FM Radio
Smox Tile Tools / Blend Emboss
Fun House / Radial Mirror
Xero XL / Porcelain Material





For any problems that may arise
remember to save your work often



started:

1 .- Open a new transparent cloth 680 x 480
2 .- color palette to foreground color: # BC5538
and Background color: # E4DBC9
Form a gradient with two colors
Linear. Angulo 45. Repeats 0. Investing

3 .- Paint Bucket: paint the cloth
4 .- Selections. Select All

5 .- Open "lizztish_picking-proppies"
Copy and paste the selection
Remove. 6 .-

Selection Set. Radial Blur. Values:



7 .- Effects. Filter Simple / Quick Tile / Values:



8 .- Effects. DSB Flux Filter / Radial Smox / Values:



9 .- Effects. Filter FM Tile Tools / Blend Emboss / Values:



10 .- Effects. Fun House Filter / Radial Mirror / Vaalores: 2

11 .- Open "calguisdoceur17710"
Copy and paste as new layer Image
. Change size: 70%
"Option to resize all layers NOT tikeada"
Set. Sharpness. Locate
focus to model 3D effects
. Shadow: Shadow 1/1/100/1/negro
3D Effects: 5/5/50/5/negro

12 .- Open "Homen cute"
Copy and paste as new layer Image
.
Mirror Image. Resize: 60%
"Option to resize all layers NOT tikeada"
Set. Sharpness. Focus
Opacity: 42
Locate by model

13 .- Image. Adding Borders:
2 px color: # ffffff (White)
50 px color: # BC5538

14 .- Wand tool. Values:



Select the edge of
50px Texture Effects. Blinds. Values:



15 .- Selections. Investing
3D effects. Shade: 5/5/50/5/negro

Remove Selection
16 .- Open "roses blanches"
Copy and paste as new layer Image
. Resize: 70%
"The option to change the size of all layers NOT tikeada "
Set. Sharpness.
focus more 3D Effects. Shade: 1/1/100/1/negro
3D effects. Shade: Locate
5/5/50/5/negro to model

17 .- Layers. New Raster Layer Place the copy

Capas.Fusionar. Flatten

18 .- Effects. Xero Filter XL / Porcelain / Values:
50/50/0/0/100/0/0/0

19 .- As the work has been something great
going to resize a bit:
Image. Resize: 89%
Set. Sharpness. Focus

Note: this step to work smaller, I always work
to upload to blogs or forums that do not support images Greater than 700 px


20 .- Save as JPG

And ready!

I hope you enjoyed it Thanks for making

Besitos



If you see any mistakes in the explanations of
this tutorial, I will thank you for
tells me correct it immediately. Thanks
rosasblog@gmail.com

Tutorial by © Artemis-August-2010
Respect Authoring
Reproduction or copying of this
Tutorial without asking my permission
Thanks